There are three basic types of mist cooling systems, namely: Low-pressure, Mid-Pressure and High Pressure. A Misting fan is perhaps the most efficient way to beat the humidity out of the atmosphere. mist cooling systems are suitable for various applications such as dry air conditioning, humidification and evasive cooling. The most important role of these cooling fans in an environment is to extract moisture from the air removing the need for water, oil or other fluids to be used directly.
This can be accomplished through two types of systems, the Spray and the fan blade system. In the spray nozzles, a fine mist of water is released from the nozzles into the air. The fan blades are arranged in a circular pattern that swirls the air through the nozzles thus forcing the water to the outside. This method of mist cooling system is effective on moist and waxy situations because the moisture in the air is exchanged with the water present.
The fan blade system is widely used in large industrial and commercial set ups to provide a cooling effect in the industrial areas. This type of mist cooling system can be used in small spaces like in automobile repair shops. These types of fans use high-speed rotating fans that force cool air into small spaces. The small spaces can be maintained without the presence of humidity because the airflow is forced out by the fan blades. They are also very effective in humidifying air in warehouses and other warehousing areas.
The most commonly found Mistle cooling system is the high-pressure type that makes use of high pressure pumps to send a stream of cool water into the nozzles. This process extracts the moisture from the air and exchange it with the water in the pipes. Water vapor is also extracted from the warmed air. The entire cycle is repeated several times to extract the needed amount of water filters. These pumps make use of high-powered motors that can provide the required cooling effect for any industrial area.
The low-pressure type of mist cooling system uses a lower pressure to force the moisture out of the air. This method is commonly found in home type cooling systems such as under the kitchen sinks. Low-pressuring nozzles are usually smaller than high-pressure nozzles. The pump of this type is usually located under the kitchen sink. The homeowners can reduce the humidity level in the air by using the pumps when the pressure falls below a certain point. Visit site for details.